Franklin FPS 4000 Series Bore Pumps

The standard FPS 4400 4” submersible pump features the new TRI-SEAL fl oating stage system. This new stage system further improves effi ciency and protects against wear when pumping abrasives like sand.
All FPS 4400 pumps are unconditionally guaranteed against sand locking for one full year.

Features:
• 300 series stainless steel hub floats with the impeller maintaining a positive seal
• Phenolic washer provides downthrust protection
• Celcon impeller provides high efficiency performance and abrasion resistance
• Noryl diffuser and disc – proven abrasion resistant material
• Floating stage design allows impeller to float independently
• Removable, spring-loaded check valve
• Maximum water temperature: 120 oF / 49 oC
• Ceramic shaft sleeve and rubber discharge bearing protect shaft and eliminate sand wear
• Powered by Franklin Electric corrosion resistant 4” submersible motors

Grundfos JP4 Rain

The JP Rain models are ideal for household pressure pumps or retic for the garden.
Constant pressure and dry run protection.Three sizes to choose from.

Grundfos CM Booster

The Grundfos CM Booster Self-Priming is a compact booster pump designed for domestic and light industrial use. The booster unit consists of a robust multistage centrifugal pump and a generator friendly PM1 or PM2 Pressure Manager.The Pressure Manager allows the pump to start and stop automatically according to demand and protects the pump from dry running. The CM Booster Self-Priming is the perfect solution if you are struggling with insufficient mains pressure,and can also be used with above or below groundwater sources.

Orange SJ400-PM Pressure Pump

The SJ400 is suitable for suction lifts, such as from an underground tank, dam or river. It can be used to provide water for up to 5 outlets such as that needed in a single or double storey home and for gardens. It is also suitable for supplying hot water systems.

Features:
Easy to install, swivel connector for 360 degree outlet rotation and pump to pipe disconnection.
Excellent suction performance.
Stainless steel motor shaft.
Glass filled nylon internal components.
Gives constant pressure and protects against loss of prime.
Made from stainless steel.
Quiet running.

Pumpmaster SPLI-300 Retic Pump

Single impeller, metal body, centrifugal pump with high efficiency. The SPLI-300 pump operates on suction lifts up to 8M, with minimal reduction in performance. Rugged in construction with Noryl, brass or stainless steel impellers, it provides high heads/medium flows, or medium head/high flow. This unit excels in water transfer, and can be used for sprinkler operation and/or dairy washdown.

Orange SP100 Sump Pump

The SP100 Sump Pump can be run both in automatic and manual modes. It comes with a float switch for full automatic operation. Both float and lead cables are made from rubber that is resistant to oils and chlorine. It has a nylon open impeller with vortex flow action and the motor is housed in stainless steel. The SP100 Sump Pump is used for pumping from cellars, septic tanks and household drainage where solids and hair need to be pumped.
Specifications – 180W